Application
Application

Chemical/Petrochemical

Chemical/Petrochemical

Chemical/Petrochemical

Corrosive liquids and gases

Air purification: Nitrogen, Carbon dioxide, Argon, helium, Ammonia

Oxygen (filters cleaned for O2 service)

Solvents, ketones, esters, amines, liquid hydrocarbons, polymers

High-temperature liquids, gases

High-pressure ethylene gas

Ethylene glycol

Catalyst retention, fluid bed reactors

Catalyst recovery, slurry phase reactors

High-efficiency solids recovery or liquid recycling


Related Products
View All Products
Metal Powder Sintered Porous Elements Ycrh-SP-Lsr
Metal Powder Sintered Porous Elements Ycrh-SP-Lsr
Ycrh-SP-Lsr is the metal powder sintered porous filter tube with a symmetrical pore (SP) structure in the tube-wall thickness direction, and it has a Low Surface Roughness (LSR). This type filter element is fabricated by a special technique combined with isostatic cold pressing and high-vacuum sintering (some alloys are required atmosphere protecti
View More
Metal Powder Sintered Porous Elements Ycrh-SP-Hsr
Metal Powder Sintered Porous Elements Ycrh-SP-Hsr
Ycrh-SP-Hsr is the metal powder sintered porous filter tube with a symmetrical pore (SP) structure in the tube-wall thickness direction, and it has a High Surface Roughness (HSR). This type filter element is fabricated by traditional preparation techniques via isostatic cold pressing and high-vacuum sintering (some alloys are required atmosphere pr
View More
Metal Powder Sintered Porous Elements Ycrh-SSP
Metal Powder Sintered Porous Elements Ycrh-SSP
Ycrh-SSP is the metal powder sintered porous filter tube with a small diameter and symmetrical pore (SSP) structure in the tube-wall thickness direction. This kind of filter tube is fabricated by a special technique combined with isostatic cold pressing and high-vacuum sintering.
View More
Metal Powder Sintered Porous Elements Ycrh-AsP
Metal Powder Sintered Porous Elements Ycrh-AsP
Ycrh-AsP is the metal powder sintered porous filter tube with an asymmetrical pore (AsP) structure in the tube-wall thickness direction. The asymmetrical metallic membrane is fabricated by a special coating, or in-situ reactive technique via isostatic cold pressing and high-vacuum sintering.
View More

+86 188 2910 2321

x